Omron CPM2B Bedienungsanleitung PDF herunterladen (Seite 51)

3-4SectionInstalling the CPM2B

Installing the Expansion I/O Connecting Cables

1, 2, 3... 1. Insert the Expansion I/O Cable into the connectors on the CPU Board and

Expansion I/O Board.

CPU Board

Expansion

I/O Board

Expansion I/O Cable

(included with the Expansion

I/O Board)

The cable from the CPU Board

connects to the upper Expansion

I/O Connector (the one with the

short locks.)

Install the shorter connector of

the cable in the lower Board and

the longer connector in the up-

per Board.

2. Push the cable’s connector into the Board’s connector until both lock levers

lock solidly.

Lock lever

To remove the Expansion I/O Cable, open the connectors lock levers and

pull out the cable’s connector.

Lock lever

3-4 Installing the CPM2B

Install the CPM2B as shown in the following diagram. The CPM2B cannot be

installed on DIN Track.

Four M4 screws

186

100

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 148 149

Keine Kommentare

Omron CPM2B Bedienungsanleitung Seite 51